bstp

TYPE OF FLANGES/RANGE
	TYPE	Size Range	Pressure	Dimensional Standard

	WELDING NECK	1/2" To 48"	150#	ANSI/ASME B16.5
	They Join the butt-weled pipe,they are prefered when radio graphed joints is required,or when efforts are highest on the union, the long conical neck optimizes stress distribution	1/2" To 48"	300#	ASME B16.47
		1/2" TO 24"	400#	SR.A
		1/2" To 30"	600#	SR.B
		1/2" To 24"	900#	MSS SP44
		1/2" To 12"	1500#	BS3293
		1/2" TO 08"	2500#	BS4504/DIN

	SLIP-ON FLANGES	1/2" To 48"	150#	ANSI/ASME B16.5
	Place two fillets by welding, sliding inside the tube. So its installation cost is lower, requiring less pre- cision in cutting the pipe.	1/2" To 48"	300#	ASME B16.47
		1/2" TO 24"	400#	SR.A
		1/2" To 30"	600#	SR.B
		1/2" To 24"	900#	MSS SP44
		1/2" To 12"	1500#	BS3293
		1/2" TO 08"	2500#	BS4504/DIN

	THREADED FLANGES	1/2" To 24"	150#	ANSI/ASME B16.5 BS4504/DIN
	They are placed in pre threaded pipe,usually in places where welding can not be pplied,not recommended for use in systems with intense pressure variation	1/2" To 24"	300#
		1/2" TO 24"	400#
		1/2" To 24"	600#
		1/2" To 24"	900#
		1/2" To 12"	1500#
		1/2" TO 08"	2500#

	LAP JOINT FLANGES	1/2" To 24"	150#	ANSI/ASME B16.5 BS4504/DIN
	Overlapping sliding on a board, usually used in places where it is often necessary to disassemble for cleaing or dismantling reparaciones, EI cost decreases because of the ease of turning the flanges and align the holes	1/2" To 24"	300#
		1/2" TO 24"	400#
		1/2" To 24"	600#
		1/2" To 24"	900#
		1/2" To 12"	1500#
		1/2" TO 08"	2500#

	SOCKET WELDING	1/2" To 4"	150#	ANSI/ASME B16.5
	Developed especially for small dia-meters and high pressures,tube is inserted in them to the seat and then is welded in against the cube steak	1/2" To 4"	300#
		1/2" To 4"	400#
		1/2" To 4"	600#
		1/2" To 4"	900#
		1/2" To 4"	1500#
		1/2" To 4"	2500#

	BLIND FLANGES	1/2" To 24"	150#	ANSI/ASME B16.5
	Developed especially for small dia-meters and high pressures,tube is inserted in them to the seat and then is welded in against the cube steak	1/2" To 24"	300#	ASME B16.47
		1/2" TO 24"	400#	SR.A
		1/2" To 24"	600#	SR.B
		1/2" To 24"	900#	MSS SP44
		1/2" To 12"	1500#	BS3293
		1/2" TO 08"	2500#	BS4504/DIN

TYPE,SIZE RANGE,PRESSURE & DIMENSION STANADARD FOR FLANGE