Description:EN 10296 Stainless Steel Welded Pipe for Mechanical and engineer Service

Standard: EN 10296

Material: 1.4301 (X5CrNi18-10), 1.4306(X2CrNi19-11), 1.4948, 1.4401(X5CrNiMo17-12-2), 1.4404 (X2CrNiMo17-12-2), 1.4571 (X6CrNiMoTi17-12-2), 1.4541 (X6CrNiTi18-10), 1.4833, 1.4878, 1.4550, 1.4462, 1.4438(X2CrNiMo18-15-4), 1.4845 

Nominal Dia: 3/8" to 80" NB for welded pipe  ,
Schedules: 5S, 10S, 40S, 80S, 10, 20, 30...120, 140, 160, XXS 
THk 0.02" to 1.9" (0.5mm to 48mm)

Length:20 m(Max) or as your requirement

Process: EFW (argon arc welding /TIG, plasma arc welding/PAW, and submerged arc welding/SAW) 

Finish: Annealed & pickled, bright annealing, Polished

Ends: Beveled or plain end, square cut, burr free ,Plastic Cap at Both end

Packing: Bare packing/bundle packing with woven bag/wooden or steel frame crate packing/plastic cap protection at the both sides of tubes and suitably protected for sea-worthly delivery or as requested.

Inspection and Test Procedure
1.100% PMI,Spectro Chemical Aanlysis Test for Raw Material
2.100% Dimension & Visual Examination
3. Mechanical Properties Test Include Tension Test,Flattening test,Drift Expanding Test,Weld Bend Test
4.Leak tightness Test or NON-DESTRUCTIVE Test  (ET or UT)
5.Radiographic Test for Welded Pipe (shall be accordance with specification,or shall be as agreed upon between the purchaser and vendor)
6.Straightness Test  (optional)
7.Roughness Test (optional)
8.Intergranular Corrosion Test(optional)
9.Impact Test (optional)
10.Grain Size Determinations (optional)
NOTES : ALL THE TESTS AND INSPECTION RESULT NEED TO BE SHOWED IN REPORTS ACCORDING TO STANDARD AND SPECIFICATION.