Description:Nickel and Nickel Alloy Seamless Tube for Condenser Application

Standard:ASTM/ASME B/SB163,ASTM/ASME B/SB167,B/SB 165,B/SB 407, B/SB 423,B/SB 444,B/SB B677,B/SB668 ,B/SB622
Material:UNS N02200; UNS N02201; UNS N04400; UNS N06025; UNS N06045; UNS N06600; UNS
N06601; UNS N06603; UNS N06686; UNS N06690; UNS N08120; UNS N08800; UNS N08801; UNS N08810; UNS
N08811; UNS N08825
Size Range :OD:1/2" (12.7mm) to 3" (76.2mm), WT 0.02" (0.5mm) to 0.12"(3.05mm)

Length:
30 m(Max) or as your requirement

Process:
Cold drawn, Cold rolled, Precision Rolled for Seamless Pipe or Tube

Finish:Annealed & pickled, bright annealing, polished

Ends:Beveled or plain end, square cut, burr free ,Plastic Cap at Both end

Packing:Bare packing/bundle packing with woven bag/wooden or steel frame crate packing/plastic cap protection at the both sides of tubes and suitably protected for sea-worthly delivery or as requested.
Inspection and Test Procedure
1.100% PMI,Spectro Chemical Aanlysis Test for Raw Material
2.100% Dimension & Visual Examination
3. Mechanical Properties Test Include Tension Test,Flaring Test (For Seamless tube/pipe),Hardness Test
4.100% Hydrostatic Test or 100% NON-DESTRUCTIVE Test  (ET or UT)
5.Radiographic Test for Welded Pipe (shall be accordance with specification,or shall be as agreed upon between the purchaser and vendor)
6.Straightness Test  (optional)
7.Roughness Test (optional)
8.Intergranular Corrosion Test(optional)
9.Impact Test (optional)
10.Grain Size Determinations (optional)
NOTES :ALL THE TESTS AND INSPECTION RESULT NEED TO BE SHOWED IN REPORTS ACCORDING TO STANDARD AND SPECIFICATION.